Why Dry Fogging Doesn’t Work for Mold Remediation?

When's the last time you've heard about mold problems in a property? Perhaps a friend complained about musty smells, or you saw those black spots across your bathroom's ceiling. But the truth is, they aren't just ugly and prevalent but also a silent health hazard! You can experience chronic respiratory issues and allergic reactions due to molds.

It's bad news for your property, too, as mold can damage the walls, floors, and even your HVAC system. To avoid these problems, many homeowners fall for quick fixes like "dry fogging." But the question is: Is dry fogging enough?

Our answer is no! And in this blog, we'll tell you the reasons behind this fact in detail. Plus, we'll also give you an alternative solution to help you get rid of mold problems!

Your Health Matters – Get Professional Mold Removal Now!

What is Dry Fogging?

If you are looking for mold removal, you must have heard of dry fogging. This process uses disinfectant chemicals in an aerosolized form to prevent mold growth. It is sprayed into the open air around the surface where mold growth is present to prevent the spores from escaping and causing further damage.

Sounds convenient, right? Well, it actually is! Besides, you'll get several benefits like the ones listed below:

Improved air quality due to the removal of mold spores from the air.
Cost-effective solution for mold removal.
An environmentally neutral method that's neither good nor bad for the environment.

But then, why should we not use dry fogging for mold abatement ? We'll give you a concrete answer in the next section.

Why Dry Fogging Is Not Effective In Clearing Out Mold

When you opt for mold remediation in your property, you're looking for complete mold removal and protection from further contamination, right? That's what dry fogging can't provide to you. Plus, there are other drawbacks as well!

1. Dry Fogging Can't Address the Root Cause of Molds

Dry fogging can only stop the spreading of existing mold spores, which means it won't prevent the mold from growing back! The vaporized chemicals can just kill the ones on the surfaces and won't remove the ones inside the hard surfaces.

Also, as per ANSI/IICRC (standards for mold remediation), killing visible molds without addressing the source isn't enough! For the best results, you'll have to limit mold growth and prevent its further spread efficiently.

2. Dry Fogging Doesn't Remove Dead Mold Spores

Even if dry fogging kills the molds, it won't be able to remove the harmful dead mold spores from the environment. These spores can still cause poor air quality, allergic reactions, and other diseases.

3. Violation of Industry Standards

By choosing dry fogging, you're violating core industry standards for mold remediation as well! The regulatory bodies like ANSI/IICRC say that fogging fails to scrape, sand, or discard mold-infested structures. The only right way to permanently get rid of molds is to physically remove them and not just kill them.

4. Lack of Containment and Filtration Methods

Another thing about mold is that the moment you touch it, millions of spores go airborne, and these spores have the potential to make you ill. That is why removal of mold is not merely a cleaning process; it is also about its containment.

The IICRC S520 protocols call for the use of negative air pressure systems, HEPA filtration, and physical barriers to capture every spore.

Dry fogging? It bypasses all these precautions altogether.

5. Time Consuming

Dry fogging can take anywhere between several hours and several days, depending on the affected area in your home. But even after hours of work and effort, there is no guarantee that the mold won't come back! So, there's a high chance that you're just wasting your time using dry fogging for mold removal!

Protect Your Home From Mold – Call Us for Expert Removal Services Now!

What Are The Best Solutions For Total Mold Abatement in Stockton?

If you are looking for the best practices to remove mold from your home completely, you'll have to reach out to a mold removal company. They will guarantee you results with the following steps.

The first step for mold removal is to identify the source of the moisture that is leading to the growth of mold. The experts will check for hidden leaky pipes, drips, or sagging ceilings. Once the source of moisture is determined, you can rest assured that half the battle is won.
The next step is to remove the mold growth. Here, the experts will not resort to scrubbing surfaces with mold-killing cleaners and power washing. This is because scrubbing surface areas with chemical cleaners will only kill the mold on the surface but not the mold spores, which, when retained in the air, can lead to further mold growth.
The experts will then move on to dry wet areas and surfaces as quickly as possible to ensure no area is susceptible to mold growth. For this, they might use a dehumidifier or other advanced techniques and tools.
Moving forward, the mold removal company will look out for ventilation-related issues and get them repaired. This is an especially important step because mold spores growing inside air vents can easily travel through the air you breathe and lead to health hazards. Therefore, it is important to identify and properly treat the ducts to prevent the spread of mold in other regions of your home.
In the last step, they will seal the deal with mold-resistant paint or sealant for efficient mold abatement.

Takeaway

Dry-fogging is like a band-aid solution for a problem that needs a careful and comprehensive approach. Although it's cheap and can get rid of the musty smell in your home, it's not a permanent solution. This is because dry fogging doesn't address the root cause of molds, and cannot prevent them from coming back, and is also a time-consuming process.

It doesn't follow industry standards or proper contamination and filtration methods for mold removal. So, if you need mold removal, always go for professional help. They follow a proper step-by-step approach to completely remove molds from your home and keep them from coming back!

Read More About

Molds Spread Fast, Don’t Wait Until It’s Too Late! Contact Our Experts At JM Environmental For Immediate Help.

At JM Environmental, Inc., we have three decades of experience in hazardous material abatement and demolition, especially mold remediation, removal, and abatement, which makes us the best in the industry.

JM Environmental professionals undergo proper training to make your safety our top priority. You can trust our expertise as our trusted mold removal company in Stockton provides top-quality services no matter what!

We can tackle each and every mold problem without breaking your bank. Contact us now!